More than 4,000 piglets were buried in flames! Guangzhou Huadu No. 1 farm caught fire and lost or exceeded 8 million yuan

  Guangzhou Fire Protection reported on the 18th that at 20:31 on the evening of March 17, the Guangzhou 119 Command Center received an alarm saying that a fire broke out in a pig farm in Yuandong Village, Huadong District, Huadu District, and the Command Center quickly dispatched 10 fire fighting units. Vehicle, 36 commanders rushed to the scene for disposal.
  After the fire department arrived at the scene, the investigation revealed that the site occupied an area of ​​about 60,000 square meters for the breeding base. The fire broke out in one of the breeding farms used to breed piglets. The structure of the factory building is a single-story sheet metal structure board room. The fire at the scene is in a fierce burning stage, and no personnel are trapped in the factory building.
  After learning the situation on the scene, the commander immediately ordered the evacuation of surrounding personnel, and at the same time organized firefighters to set water gun positions on all sides of the fired farm to shoot water to suppress the fire. Due to the closed plant on the site, the water gun could not reach the fire for a while, and then the excavator was called. Some areas were cleaned up, fire-extinguishing passages were opened, and after nearly five hours of fire fighting by firefighters , the fire at the scene was completely extinguished, and no injuries were caused by the accident.
  According to the parties, the farm was a nursery with more than 4,000 piglets, none of which survived. The reporter learned from the Guangzhou Fire Department that the cause of the accident was caused by a short circuit in the wire of the lamp.
Currently piglets hard to find, the price of dancing, according to agricultural financial canon reporter survey, Aberdeen pork price grid mostly in the 2,000 yuan / head or more. Related Links: Sky Pig There is a pig farm in Guangdong that offers 20,000 yuan per head for a hybrid sow! is that true? | Pig Alliance
According to current market estimates, the value of more than 4,000 piglets has exceeded 8 million yuan! The short circuit caused such a serious loss to the pig farm! So how can farms avoid such tragedies?
  Further reading: How to prevent overload and fire of wires and cables?
  Take a look at what the wire and cable manufacturers say: During the line design process, the exact on-site capacity should be allowed, and considering the possibility of new capacity, choose the appropriate type of wire and cable. Large capacity, you should choose a thicker wire and cable. Circuit design and reasonable selection are the key steps to prevent overload. If the design is not selected properly, it will be difficult to correct the inherent risks. For some small projects, places do not have serious design choices. Free choice, laying lines, which is very dangerous. New electrical appliances and electrical equipment should fully consider the original capacity. The original wires and cables did not meet the requirements and should be redesigned and rebuilt.
The lines should meet the relevant requirements, so that electrician construction workers can lay them. The wiring conditions directly affect the heat dissipation of the wires and cables. Generally, the laying of wires and cables should not be piled through flammable and flammable materials, which will lead to poor heat dissipation of the wires, cause heat accumulation, cause the possibility of surrounding flammable items to ignite, and increase the risk of fire caused by overload; Wear steel pipe protection to separate the ceiling from the wire, so that the flame will not fall under conditions such as overload and short circuit, which can avoid fire.
  Strengthen power management, avoid random wiring, confusion, and use mobile sockets carefully. Chaotic wiring, chaotic wiring, the use of mobile power outlets is actually adding electrical equipment to a section of wiring, increasing the amount of current that may cause overload. There are more mobile jacks than the wall of the fixed socket. If the mobile socket uses too much electrical equipment, the original circuit must be unbearable. For higher power equipment, the appliance should be provided with a separate line, and the mobile power socket should not be used as the wiring source.
  Speed ​​up the transformation of old lines to eliminate fire hazards. Old enterprises, old residential areas and other units, due to the long use time, many lines are aging, exceeding the service life. Even if some current-carrying lines are not large, the aging line can hardly bear such a load, and it is also accompanied by the risk of overload display. Especially in the old residential areas, the lines have been aging for a long time, but with the improvement of people’s living standards and the increase in household appliances, the power consumption is still increasing year by year, which is really worse. For the old line, we should promptly urge, coordinate, promote rectification as soon as possible, eliminate fire hazards and ensure safety.
Disclaimer: Some article materials are from the Internet, the source has been marked, the copyright belongs to the original author, and the content is for readers’ reference only. If you violate the original author’s rights, please leave a message and contact us to delete!

Post time: Mar-19-2020

WhatsApp Online Chat !